26
3
Select the product from Display under Display options. Next, select Calibrate.
4
To provide calibration samples, tap the crosshair each
time that it appears on the screen.
Right-click anywhere on the screen to return to the
last calibration point. Press the Esc button to close
the tool. Do not change your screen orientation until
you have completed the calibration process.
5
Do you want to save the calibration data?
appears. Select Yes to save changes.
Digitizer Calibration Tool
Yes No
Do you want to save the calibration data?
6
"
Selecting Reset
To Next Page
Loading...
