88
Screen issue
The screen is not clear. The screen is blurry.
Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky.
Check that the resolution and frequency of the PC and graphics card are set within a range
There are shadows or ghost images left on the screen.
The screen is too bright. The screen is too dark.
Brightness and Contrast.
Screen colour is inconsistent.
Go to PictureColour Space Settings settings.
White does not really look white.
Go to PictureWhite Balance settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
The product will turn off automatically.
If a PC is connected to the product, check the power status of the PC.
If the signal from a connected device is not detected, the product automatically turns off after
The screen display does not look normal.
Encoded video content may cause the display to appear corrupted in scenes featuring fast
Low signal level or low picture quality may cause the display to appear corrupted. This does not
mean the product is defective.
A cell phone within a distance of one-meter radius may cause static on analogue and digital
products.
The brightness and colour do not look normal.
Go to PicturePicture Mode, Colour, Brightness and
Sharpness.
Reset the screen settings to the default settings.
To Next Page
Loading...
