40
3-19) Freezer Door
Freezer Door
1. Pull out the Pull Out Drawer by maximum.
2. After lifting the Pull Out Drawer up holding
both sides, remove it at the rail system.
3. Remove the Tilting Pocket() by lifting it up
4. After lifting the Freezer Guard up holding
both sides, remove it at the rail system.
5. Press the fixing hook of rail system.
6. After holding and pulling out the top of
Freezer Door, remove it at the rail system.
CAUTION
Make sure there is no scratch
at the end of Sliding Rail by
being dented from the floor .
To Next Page
Loading...
