4
●Unplug the appliance before replacing or repairing electrical parts.
⇢ Be careful to avoid electric shock.
●Always use only the correct replacement parts.
⇢ Check the model, rated voltage, rated current and running temperature rating.
●When troubleshooting, verify that wiring harnesses are connected securely.
⇢ Make sure the connectors are not separated when power is supplied.
●Check for visible traces of water on electrical parts.
⇢ Replace or secure any part that may have come in contact with water.
●Check the status of parts after replacement or troubleshooting.
⇢ All parts must be reinstalled properly.
●Check the location where the refrigerator will be used.
⇢ If the refrigerator will be used in a damp or wet space, or if installation will be
unstable, the unit should be relocated.
●The refrigerator must be grounded properly.
⇢ An earth ground should be used if there is a risk of high humidity or wetness.
● The refrigerator should be plugged into a dedicated outlet.
Make sure the power cord is not damaged, crushed, squeezed or burned.
● If the plug is damaged it should be replaced.
If the socket is damaged, it should not be used.
●Consumers must not try to repair the refrigerator.
●Nothing should be stored in the refrigerator except food.
⇢ Drugs requiring precise temperatures should not be stored in the refrigerator.
⇢ Flammable substances (alcohol, benzene, ether, LP gas, etc.) carry risk of
explosion and should not be stored in the refrigerator.
To Next Page
Loading...
