EasyManua.ls Logo

Samsung RF263BEAE** - 4-1-6. Option setting function

Samsung RF263BEAE**
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
57

4-1-5. Exhibition mode setting function
1) If Energy Saver Key + Freezer are pressed simultaneously for 5 seconds during normal operation, Exhibition
mode will be started with buzzer sound(ding-dong).
2) If above Energy Saver Key + Freezer Key are pressed one more time, Exhibitoin mode will be canceled.
3) If Exhibition mode is selected, blinks "OF-OF" on the temperature setting display of . The panel and it
indicates the refrigerator has entered the Cooling Off mode.
4) During Exhibition mode, if fresh food and freezer compartments sensors are higher than 149(65).
Exhibition will be canceled automatically and freezing operation will be returned.
(There is no buzzer sound when the Exhibition mode is canceled by the temperature.)
5) Operation contents of Exhibition Mode
- Display, Fan motor and etc operate normally, not to operate compressor only.
- Defrost is not operated. (including french heater)
- Display function of the initial real temperature is finished.
- Under the condition of Exhibition mode, Exhibition mode will be operated when Power On after Power
OFF.
If Energy Saver Key + Freezer Key are pressed for 5 seconds, Exhibition mode will be started.
R Load mode Check list
Display LED Display contents Operation contents
R-1-ⓐ R-FAN High When FF compartment FAN operates with high speed, applicable LED ON
R-1-ⓑ R-FAN Low When FF compartment FAN operates with low speed, applicable LED ON
R-1-ⓒ R-DEF Heater When FF compartment defrost heater operates, LED ON
R-1-ⓓ Start Mode When refrigerator is plugged initially, LED ON
R-1-ⓔ Overload condition When ambient temperature is more than 93℉(34°C), LED ON
R-1-ⓕ Low temperature condition When ambient temperature is less than 72℉(22°C), LED ON
R-1-ⓔ,ⓕ
(ALL LED Off)
Normal Condition When ambient temperature is between 73℉(23°C) and 91℉(33°C)
R1-ⓖ Exhibition Mode LED ON at the display mode.
F-1-ⓐ COMP. When COMP operates, applicable LED ON.
F-1-ⓑ F-FAN High When FZ compartment FAN operates with high speed, applicable LED ON.
F-1-ⓒ F-FAN Low When FZ compartment FAN operates with low speed, applicable LED ON.
F-1-ⓓ F-DEF Heater When FZ compartment defrost heater operates, LED ON
F-1-ⓔ C-FAN High When compressor FAN operates with high speed, applicable LED ON.
F-1-ⓕ C-FAN Low When compressor FAN operates with low speed, applicable LED ON.
F-10-ⓓ Ice Room-FAN High When Ice Room-FAN operates with high speed, applicable LED ON.
F-10-ⓔ Ice Room-FAN Low When Ice Room-FAN operates with low speed, applicable LED ON.
F-10-ⓖ French Heater When French heater operates, applicable LED ON
R-10-ⓐ Pantry Room Damper Open When damper open, applicable LED ON
R-10-ⓓ Ice maker full When the Ice Maker's Bucket is full, applicable LED ON in FF-room
R-10-ⓔ Ice maker full When the Ice Maker's Bucket is full, applicable LED ON in RZ-room
R-10-ⓕ More Heater Add to Assy Water Pipe Heater in Fre-room

Table of Contents

Related product manuals