Samsung SCB-9050 User Manual

Thermal Night Vision Camera User Guide
22
Thermal Night Vision Camera User Guide
23
NUC(Non-uniformity Correction) is a menu calibrating all pixel's characteristics to get better image.
SelectanNUCoperationmode.Ifyouchoose“MANUAL”,theuseristoperformNUCmanually,
instead of having the device conduct calibration automatically.
Operating the Camera
NUC MODE (Calibration Mode)
MAIN SETUP
1. BRIGHTNESS AUTO
2. CONTRAST MANUAL
3. RANGE AUTO
4. NUC
5. NUC MOOE INTERVAL
6. IMAGE ADJ
UsethisoptiontoswitchbetweenanLRangeandHRangesettings.Select“AUTO”toallowthe
settings to automatically change between L Range and H Range based on the surrounding
temperature.Choose“L”tokeepthetemperaturerangeatLRangeregardlessofthesurrounding
temperature.Inthesameway,select“H”toalwayshavethetemperaturerangesetatHRange.
3.PresstheLEFTbuttonorRIGHTbuttonwhilethecursorisalignedwith“3.RANGE”toswitchthe
RANGEsettingfrom:AUTO  L  H  AUTO.(Defaultvalue:AUTO)
4.PresstheSETbuttonwhilethecursorisalignedwith“4.NUC”tocalibrate.Screenoperationswill
then be temporarily suspended.
MAIN SETUP
1. BRIGHTNESS AUTO
2. CONTRAST MANUAL
3. RANGE AUTO
4. NUC
MAIN SETUP
1. BRIGHTNESS AUTO
2. CONTRAST MANUAL
3. RANGE AUTO
4. NUC
5. NUC MOOE INTERVAL
RANGE
NUC (Calibration)
PresstheLEFTbuttonorRIGHTbuttonwhilethecursorisalignedwith“MANUAL”toadjustthe
CONTRASTovertendifferentlevels:1 2  3  4  5  6 7 8  9  10 1. Select
“2.RETURN”toconfirmthecurrentsettingandgobacktotheMAINSETUPmenuscreen.(Default
value: 6)
*InorderfortheCONTRASTAUTOsettingtobeenabled,theBRIGHTNESSAUTOsettingmustalreadybe
turned on.
Accordingly,ifAUTOcannotbesetto“ON”,enabletheBRIGHTNESSAUTOsettingandthenturnonthe
CONTRASTAUTOsetting.
Usethismenutoadjustimages.Afteryouselectthisoption,thefollowingsubmenuwillappear.
IMAGE ADJ
5.PresstheSETbuttonwhilethecursorisalignedwith“5.NUCMODE”todisplaythefollowing
NUCMODEsubmenu.PresstheLEFTbuttonorRIGHTbuttonwhilethecursorisalignedwith
“5.NUCMODE”toswitchfrom:INTERVAL  AMB  MANUAL  INTERVAL.PresstheSETbutton
againtoadjustthesubmenu.Select“2.RETURN”toconfirmthecurrentsettingandgobackto
theMAINSETUPmenuscreen.(Defaultvalue:INTERVAL)
 ·INTERVAL:AnNUCwillbeperformedatthespecifiedINTERVAL.
· AMB : An NUC will only be performed when a temperature change meeting the set
temperature (0.1°C-10.0°C) is detected by the internal temperature sensor.
· MANUAL : An NUC will not be performed.
MAIN SETUP
1. BRIGHTNESS AUTO
2. CONTRAST MANUAL
3. RANGE AUTO
4. NUC
5. NUC MOOE INTERVAL
6. IMAGE ADJ
7. SPECIAL

Samsung SCB-9050 Specifications

General

Brand	Samsung
Model	SCB-9050
Category	Security Camera
Language	English