Samsung SCB-9050 - Image Enhancement Options

Thermal Night Vision Camera User Guide
24
Thermal Night Vision Camera User Guide
25
MAIN SETUP
1. BRIGHTNESS AUTO
2. CONTRAST MANUAL
3. RANGE AUTO
4. NUC
5. NUC MOOE INTERVAL
6. IMAGE ADJ
7. SPECIAL
8. SAVE
POLARITY”toswitchtheblack/whiteinversionsettingfrom:BW WB BW.Select“7.
RETURN”toconfirmthecurrentsettingandgobacktotheMAINSETUPmenuscreen.
(Default value: BW)
Usethismenutoadjustenvironmentsettingsitemsrelatedtoareassuchasscreendisplay,video
output,andcommunications.PresstheSETbuttonwhilethecursorisalignedwith“7.SPECIAL”to
display the following sub menu.

POLARITY:
Use this option to set the black/white properties of images.
When“BW”isselected,hightemperatureareaswillbe
shown in white, while low temperature areas will be
displayedinblack.If“WB”ischosen,blackandwhitewill
bedisplayedintheoppositewayasBW.PresstheLEFT
buttonorRIGHTbuttonwhilethecursorisalignedwith“4.
Operating the Camera
SPECIAL (Environment Settings Mode)
IMAGE ADJ
1.3D-DNR M
2.SHARPNESS 4
3.D-ZOOM OFF
▶
4.POLARITY BW
5.COLOR COLOR1
6.ISOTHERM OFF
7.RETURN

ZOOM(DigitalZoomSettings):
  PresstheLEFTbuttonorRIGHTbuttonwhilethecursoris
alignedwith“3.D-ZOOM”toswitchthezoomsettingfrom:
OFF  X2(timestwo)  X4(timesfour)  OFF. Select “5.
RETURN”toconfirmthecurrentsettingandgobacktothe
MAINSETUPmenuscreen.(Defaultvalue:OFF)

SHARPNESS (Edge Emphasis) :
Use this option to use image processing to emphasize
edges.PresstheLEFTbuttonorRIGHTbuttonwhilethe
cursorisalignedwith“2.SHARPNESS”toswitchthe
SHARPNESSsettingfrom0-5.Select“5.RETURN”to
confirmthecurrentsettingandgobacktotheMAINSETUP
menu screen. (Default value: 4)

3D-DNR (Noise Reduction) :
 PresstheLEFTbuttonortheRIGHTbuttontolimitthe
amount of noise produced. (Default value: M)
IMAGE ADJ
▶
1.3D-DNR M
2.SHARPNESS 4
3.D-ZOOM
OFF
4.POLARITY BW
5.COLOR COLOR1
6.ISOTHERM
OFF
7.RETURN
IMAGE ADJ
1.3D-DNR M
▶
2.SHARPNESS 4
3.D-ZOOM
OFF
4.POLARITY BW
5.COLOR COLOR1
6.ISOTHERM OFF
7.RETURN
IMAGE ADJ
1.3D-DNR M
2.SHARPNESS 4
▶
3.D-ZOOM
OFF
4.POLARITY BW
5.COLOR COLOR1
6.ISOTHERM OFF
7.RETURN
COLOR :
Use this option to set the color of images. When "COLOR1" is selected, high temperature
areas will be shown in red, while low temperature areas will be displayed in blue. If COLOR2
chosen, high temperature areas will be shown in yellow, while low temperature areas will be
displayed in blue. When "MONO" is selected, high temperature areas will be shown in white,
while low temperature areas will be displayed in black.
ISOTHERM:
  ISOTHERMcanapplycolorstotheareawhosetemperaturerangeover"LRANGETH"or"L
  RANGETH"inthescreen.
  LRANGETH:MinimumtemperatureintheISOTHERM'sareawhenRANGEisL.
  HRANGETH:MinimumtemperatureintheISOTHERM'sareawhenRANGEisH.
 RETURNConfirmthecurrentsettingandgobacktotheIMAGEADJsubmenuscreen.