1
SCB-9050/9051, camera sun shield
2
Screws for fastening camera (4×M3XL12)
3
L-type hexagon wrenches (3: 1.5 mm/2.5 mm/3.0 mm)
4
Bolts for fastening camera (2)
5
Lens cap
6
User Guide
Position the camera so that it is not facing
towards the sun or any other bright light source.
Failure to obey this caution could result in the
microbolometer being damaged beyond repair.
Do not install the product in very hot
or very cold locations.
Using the product in an area with very hot (55°C or higher) or
cold (-30°C or lower) temperatures could result in product
failure, or a reduction in image quality. Ensure proper ventilation
when installing the product in particularly hot locations.
Do not drop the product, or subject it
to strong impacts or vibrations.
Failure to obey this caution could result in product
failure.
Do not touch the camera lens with
your hands or fingers.
The lens is the most important part of the camera.
Ensure the lens is kept free of fingerprints, etc.
❶ 2 3
5 6
4
1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard), or 0.197" (ASA
standard)
Cautions
Overview
To Next Page
Loading...
