1
Video signal/communications (RS485) cable
2
Power cable (AC 24 V, 50/60 Hz)
3
Lens (SCB-9050 : 14mm, SCB-9051 : 50mm)
4
Support platform for fastening camera
1
Lens (SCB-9050 : 14mm, SCB-9051 : 50mm)
2
Key SW
3
Key SW terminal block
4
IF terminal block
1 2
3
4
Names of external camera parts
Names of internal camera parts
Front Rear
1
3 4
2
❶
A screw to fix the focus is located on the bottom of the lens.
2
A sun shield is provided with this camera to allow for outdoor installation.
Using the bolts and hexagon wrenches included in this package, fasten the camera unit
and sun shield firmly in place. (Do not use excessive force during assembly.)
External Part Names
•
Do not adjust the focus after purchasing this product, because it will have been set to the
optimum position. Incorrectly adjusting the focus will hinder the camera’s performance.
Notes
Assembly/Adjustment Methods
SCB-9050
SCB-9051
❶
2
Ø104
367
123
104
❶
2
Ø104
352
123
104
To Next Page
Loading...
