Samsung SCB-9050 - Video and Communication Settings; Saving and Exiting Settings

Thermal Night Vision Camera User Guide
26
Thermal Night Vision Camera User Guide
27
MAIN SETUP
1. BRIGHTNESS AUTO
2. CONTRAST MANUAL
3. RANGE AUTO
4. NUC
5. NUC MOOE INTERVAL
6. IMAGE ADJ
7. SPECIAL
8. SAVE
9. EXIT
TEMPADJ:
Use this option to change the temperature unit. Press the button while the cursor is aligned
  with"4.TEMPADJ"tochangetemperaturedisplayon/offandtemperatureunit
℃/℉
.
Use this option to save device settings and establish the basic settings which will be used the next
timeyoustartupthedevice.PresstheSETbuttonwhilethecursorisalignedwith“8.SAVE”to
recordyourcurrentsettingstotheinternalmemory.Ifyouexitwithoutsaving,theMAINSETUP
menu will close without any values being updated.
 -
Camera ID(ID Display Setting) :
   UsethisoptiontoadjustthedisplaysettingofthecurrentlysetCameraID(appearsonthe
top left of the screen).
PresstheLEFTbuttonorRIGHTbuttonwhilethecursorisalignedwith“5.DISPLAYID”to
switch the CAMERA ID display setting from: ON  OFF ON.Select“6.RETURN”toconfirm
thecurrentsettingandgobacktotheSPECIALSETUPmenuscreen.(Defaultvalue:OFF)
Operating the Camera
SAVE

TVSYSTEM(VideoOutputSetting):
  Usethisoptiontoadjustthevideooutputsetting.
  PresstheLEFTbuttonorRIGHTbuttonwhilethecursoris
alignedwith“1.TVSYSTEM”toswitchtheTVSYSTEM
settingfrom:NTSC  PAL  NTSC.Select“6.RETURN”
to confirm the current setting and go back to the MAIN
SETUPmenuscreen.(Defaultvalue:NTSC)

COMMADJ(CommunicationSettingsmode):
  Usethismenutoadjustcommunicationsettings.
  PresstheSETbuttonwhilethecursorisalignedwith“3.
COMMADJ”intheSPECIALSETUPmenutodisplaythe
following sub menu.

- CAMERA ID (Camera ID Settings) :
   UsethisoptiontoadjustCAMERAIDsettings.
   PresstheLEFTbuttonorRIGHTbuttonwhilethecursorisalignedwith“1.CAMERAID”to
adjusttheCAMERAIDsettingtoavaluefrom0-255.Theadjustedvaluewillbecomevalid
whenthesettingissaved.Select“6.RETURN”togobacktotheSPECIALSETUPmenu
screen. (Default value: 0)
 -
BAUDRATE(CommunicationsSpeedSettingsMode):
UsethisoptiontochangetheBAUDRATEtooneoffoursettings:38,400bps,19,200bps,
   9600bps,4800bps.PresstheLEFTbuttonorRIGHTbuttonwhilethecursorisalignedwith
   “2.BAUDRATE”toswitchtheBAUDRATEsettingfrom:4800  9600  19,200  38,400
 4800.Select“6.RETURN”toconfirmthecurrentsettingandgobacktotheSPECIAL
   SETUPmenuscreen.(Defaultvalue:9600bps)

-UARTMODE(ParitySettingsMode):
   Usethisoptiontoadjustparitysettings.
   PresstheLEFTbuttonorRIGHTbuttonwhilethecursorisalignedwith“3.UARTMODE”to
 switchtheUARTMODEsettingfrom:8-E-1  8-O-1  8-N-1  8-E-1. Please note that
 boththebitlength(8)andthestopbit(1)arefixed.Select“6.RETURN”toconfirmthe 
 currentsettingandgobacktotheSPECIALSETUPmenuscreen.(Defaultvalue:8-E-1)
 -
RETPKT(ReturnPacketSetting):
   Usethisoptiontoadjustthereturnpacket(returnedusingthesamestatusasthedata
entered) setting.
PresstheLEFTbuttonorRIGHTbuttonwhilethecursorisalignedwith“4.RETPKT”to
switchtheRETPKTsettingfrom:ON  OFF  ON.Select“6.RETURN”toconfirmthe
currentsettingandgobacktotheSPECIALSETUPmenuscreen.(Defaultvalue:ON)
SPECLAL SETUP
▶
1.TV SYSTEM PAL
2.LANGUAGE ENGLISH
3.COMM ADJ
4.TEMP ADJ
5.RESET
6.RETURN
COMM ADJ
1.CAMERA ID 1
▶
2.BAUDRATE 9600
3.UART MODE 8-E-1
4.RET PKT ON
5.DISPLAY CAM ID OFF
6.RETURN
• Don't use SCB-9050/9051 to detect anything. Measurement error is ±15°C for objects
that have 0~100°C.
Notes

RESET(Reset):
Use this option to restore each item to its default setting.
  PresstheSETbuttonwhilethecursorisalignedwith“5.RESET”torestoreeachitemtoits
factorydefaultsetting.Pleasenote,however,thatneitherTVSYSTEMnorCOMMADJcanbe
changed.Select“6.RETURN”togobacktotheSPECIALSETUPmenuscreen.