D
Douglas JamesAug 13, 2025
What to do if the tape reached its end on Samsung SCL901 Camcorder?
- MMichael ButlerAug 13, 2025
If the tape in your Samsung Camcorder has reached its end, change to a new one.
To Next PageTo Next PageWhat to do if the tape reached its end on Samsung SCL901 Camcorder?
If the tape in your Samsung Camcorder has reached its end, change to a new one.
What to do if the tape has almost reached its end in Samsung SCL901?
If the tape in your Samsung Camcorder has almost reached its end, prepare a new one.
What to do if my Samsung SCL901 has some mechanical fault?
If your Samsung Camcorder experiences a mechanical fault, try these steps: First, eject the tape. Next, set the camcorder to OFF. Then, detach the battery and reattach it. If the problem persists after these steps, it indicates a more serious issue.
What to do if the tape is protected from recording on Samsung SCL901?
If the tape in your Samsung Camcorder is protected from recording, and you want to record, release the protection tab on the tape.
What to do if the battery pack is fully discharged on Samsung Camcorder?
If the battery pack of your Samsung Camcorder is fully discharged, replace it with a charged battery.
What to do if there is no tape in the Samsung SCL901?
If there is no tape in your Samsung Camcorder, insert a tape into the camcorder.
What to do if the battery pack is almost discharged on Samsung SCL901?
If the battery pack of your Samsung Camcorder is almost discharged, replace it with a charged one.
What to do if my Samsung SCL901 Camcorder has a built-in moisture sensor that activates DEW protection feature?
If your Samsung Camcorder's DEW protection feature is activated due to moisture, remove the battery for at least two hours. Wait until the condensation has completely disappeared.
General safety precautions for operating the camcorder.
Warnings about power, grounding, ventilation, liquids, and handling.
Steps for straps, lens cover, battery installation, and power connection.
Procedures for recharging batteries and inserting/ejecting cassettes.
Initial steps and preparations for making your first recording.
Steps to play back tapes and search for scenes.
Interpretation of self-diagnosis error codes and corresponding actions.
General troubleshooting steps for common camcorder problems.
How to handle and resolve moisture condensation problems.
General
