Samsung SCX-6545NX Series - 10. Using Your Printer with a Macintosh

Using Your Printer with a Macintosh
43
10 Using Your Printer with a
Macintosh
Your machine supports Macintosh systems with a built-in USB interface
or a 10/100 Base-TX network interface card. When you print a file from
a Macintosh computer, you can use the PostScript driver by installing the
PPD file.
N OTE : Some printers do not support a network interface. Make
sure that your printer supports a network interface by referring to
Printer Specifications in your Printer User’s Guide.
This chapter includes:
• Setting Up the Printer
• Uninstalling software
• Setting Up the Printer
•Printing
• Scanning
Installing Software
The CD-ROM that came with your printer provides you with the
PPD file that allows you to use the CUPS driver or Apple
LaserWriter driver
(only available when you use a printer
which supports the PostScript driver) , for printing on a
Macintosh computer.
Also, it provides you with the Twain driver for scanning on a
Macintosh computer.
1 Make sure that you connect your printer to the computer.
Turn on your computer and printer.
2 Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3 Double-click CD-ROM icon that appears on your
Macintosh desktop.
4 Double-click the MAC_Installer folder.
5 Double-click the Installer OS X icon.
6 Enter the password and click OK .
7 The Samsung Installer window opens. Click Continue
8 Select Easy Install and click Install . Easy Install is
recommended for most users. All components necessary
for printer operations will be installed.
If you select Custom Install , you can choose individual
components to install.
9 The message which warns all application will close on your
computer appears, Click
Continue .
10 After the installation is finished, click Quit .
N OTE :
• If you have installed scan driver, click
Restart .
• After the installation is finished, see “Setting Up the Printer”
on page 44
Uninstalling software
Uninstall is required if you are upgrading the software, or if
installation fails.
1 Make sure that you connect your printer to the computer.
Turn on your computer and printer.
2 Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3 Double-click CD-ROM icon that appears on your
Macintosh desktop.
4 Double-click the MAC_Installer folder.
5 Double-click the Installer OS X icon.
6 Enter the password and click OK .
7 The Samsung Installer window opens. Click Continue
8 Select Uninstall and click Uninstall .
9 The message which warns all application will close on your
computer appears, Click
Continue .
10 When the uninstallation is done, click Quit .