Samsung SCX-6545NX Series - Printing a report

82
PRINTING A REPORT
You can print a report on the machine's configuration or font list, etcetera.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter
password and press OK.
3. Press the Print/Report tab.
Option Option Description
Print You can print Network Configu-
ration, PS3 Font List, PCL Font
List and Schedule Jobs Report.
Schedule Jobs Report shows the
job list in pending or in delayed
faxing list as well.
Accounting
Reports
Supplies
Information
You can print the amount of each
category that your machine has
printed so far.
Network Auth.
Log Report
It displays user login IDs and
emails.
Usage Page
Report
You can print the report on the
amount of printouts depending on
the paper size and type.
Accounting
Report
Prints the report of printing out
count for each login user.
Standard Acct.
Usage Report
Prints the used amout of Stan-
dard Accounting
Standard Acct.
Remain Report
Prints the remained amout of
Standard Accounting
Report
Configuration
Report
You can print a report on the
machine's overall configuration.
Fax Report You can set to print the informa-
tion of a fax reports.
• Multi Send Report: When you
fax to several destination, set
this option to print a
transmission report. On is to
print every time you send a
fax, the machine prints a
confirmation report. With On-
Error, only when the
transmission error occurred,
the report will be printed out.
• Fax Send Report
Appearance: You can select
whether the image on the
confirmation report shows or
not.
Report
(Continue)
Fax Report • Fax Sent/Received Report:
The machine stores the logs on
each transmission and prints
out every 50 logs with this
option On. It you select Off, the
machine stores the logs but
does not print.
• Fax Send Report: The
machine prints the confirmation
report after each fax job, only
when you send a fax to one
destination.
E-mail
Confirmation
Report
The report shows the job of scan-
ning and sending it via Scan to
Email.
• On: The report is printed
whether a job successfully
completed or failed.
• Off: No report is printed after
completing a job.
• On-Error: Only in case of error
occurrence, the machine prints
the report.
Scan to Server
Confirmation
The report shows the job of scan-
ning and sending it via SMB and
FTP.
• On: The report is printed
whether a job successfully
completed or failed.
• Off: No report is printed after
completing a job.
• On-Error: Only in case of error
occurrence, the machine prints
the report.
You can also print machine's status information and browse status
with SyncThru Web Service. Open the web browser on your
networked computer and type the IP address of your machine.
When SyncThru Web Service opens, click Information > Print
information.
Option Option Description