Samsung SCX-6545NX Series - Scanning; Scanning with USB; Scanning with Network

Using Your Printer with a Macintosh
49
Scanning
You can scan documents using Image Capture program. Macintosh OS
offers Image Capture program.
Scanning with USB
1 Make sure that the machine is connected to your computer and
powered on.
2 Load originals face up into the document feeder, or place a single
original face down on the scanner glass.
3 Start Applications and click Image Capture .
N OTE : If No Image Capture device connected message appears,
disconnect the USB cable and reconnect it. If the problem persists,
please refer to the Image Capture ’s help.
4 Set the scan options on this program.
5 Scan and save your scanned image.
N OTES :
• For more information about using Image Capture , refer to the Image
Capture
’s help.
• Use TWAIN-compliant softwares to apply more scan options.
• You can also scan using TWAIN-compliant software, such as Adobe
Photoshop.
• If scanning does not operate in
Image Capture , update Mac OS to
the latest version.
Image Capture operates properly in Mac OS X
10.3.9 or higher and Mac OS X 10.4.7 or higher.
Scanning with network
1 Make sure that the machine is connected to your computer and
powered on.
2 Load originals face up into the document feeder, or place a single
original face down on the scanner glass.
3 Start Applications and click Image Capture .
4 Click Devices and click Browse Devices .
5 For Mac OS X 10.4:
Select your machine in Twain devices option. Make sure that Use
TWAIN software
checkbox is checked, and click Connect .
• If a warning message appears, click
Change Port.. to select
port.
• If TWAIN UI appears, from the Preference tab, click Change
Port.. to select port.
For Mac OS X 10.5~10.6:
Make sure that
Connected checkbox is checked beside your
machine in
Bonjour Devices .
If you want to scan using TWAIN, refer to the Mac OS X10.4 steps
above.
6 Set the scan options on this program.
7 Scan and save your scanned image.
N OTES :
• For more information about using Image Capture , refer to the Image
Capture ’s help.
• Use TWAIN-compliant softwares to apply more scan options.
• You can also scan using TWAIN-compliant software, such as Adobe
Photoshop.
• If scanning does not operate in
Image Capture , update Mac OS to
the latest version.
Image Capture operates properly in Mac OS X
10.3.9 or higher and Mac OS X 10.4.7 or higher.
Setting scan information in Scan and Fax Manager
To find out about Scan and Fax Manager program information, to check
the installed scan driver's condition, to change scan settings. and to add
or delete the folders where scanned documents to computer are saved
in
Scan and Fax Manager program, follow these instructions:
1 From the Smart Panel menu on Status bar, click Scan and Fax
Manager
.
2 Select the appropriate machine from the Scan and Fax Manager .
3 Press Properties .
4 Use Set Scan Button to change the file destination or scan
settings, to add or delete application programs, and to format files.
You can change the scanning machine by using Change port .
(Local or Network)
5 When done, press OK .