In the optional tray
1. Pull out the optional tray 2.
2. Lift the front part of the tray slightly up to release
the tray from the machine.
If the paper does not move when you pull, or if
you do not see the paper in this area, stop and
go to step 3.
3. Remove the paper in the direction shown. To
avoid tearing the paper, pull it out gently and
slowly.
If you cannot nd the jammed paper, or if there
is any resistance when removing the paper, stop
pulling and continue on step 5.
4. Open the outer cover in tray 2.
5. Open the inner cover of tray 2.
To Next Page
Loading...
