Cleaning the inside
▣
Clean every 10,000sheets or every 6months to maintain in good condition.
(When the Transfer Roller expires due to long usage.)
▣
Clean in following order; Paper Path Parts, Transfer Roller, Toner Cartridge and Drum Cartridge in the
Inner Frame.
▣
Clean with Vacuum Cleaner and Dry rag or Soft cloth.
Cleaning Instructions
1. Paper Path Parts
- Cleaning Kit : Vacuum Cleaner and Dry rag or Soft cloth.
- Mal Affects : Dust particles from paper can be copied at worst making spot stains on the paper.
- Follow the display listed on the gure below.
2. Cleaning-Transfer Roller
- Cleaning Kit : Vacuum Cleaner and Dry rag or Soft cloth.
- Mal Affects : Dust particles from paper can be copied at worst making spot stains on the paper.
- When exchanging the Transfer Roller clean the area.
- Follow the display listed on the gure below.
3. Cleaning-Frame Inside
- Cleaning Kit : Vacuum Cleaner and Dry rag or Soft cloth.
- Mal Affects : The toner can leak and pollute the interior, affecting the print quality.
- Recommend an Engineer or highly experienced worker to clean.
Open the Cover.
Cover with a piece of paper .
and lay it on a at surface.
Remove the Cartridge.
Remove the Cartridge.
Clean the Paper Path Parts