Samsung SCX-6555N - Specification

Finisher
Service Manual
2-48
Samsung Electronics
2.3.3 SPECIFICATION
2.3.3.1 Physical
(1) Size : Without Stacker : W 498 X D 390 X H 284 (mm)
With Stacker : W 726 X D 390 X H 300 (mm)
(2) Weight : 11.0 kgf
2.3.3.2 Connection
< Mechanical connection >
(1) Paper Registration : Center Registration
(2) Docking alignment position : 3 Docking Pins and 2 Latches
< Electrical Connection >
(1) Control command : 3.3V
(2) Connection : D-Sub Connector (Rear side)
(3) Control specication : Gradco I/F Specication for Samsung
< Power Supply >
(1) Power Supply : Engine supplies 24V / 5V / 3.3V to Finisher
(2) Input Power : 24V±10%, 5 ±5%, 3.3 ±5%
(3) Rating Current : 24.0 V, 3.0 A (Peak 4.5A for 25ms MAX.)
5.0 V, 0.5 A
3.3 V, 0.6 A
2.3.3.3 Functions
< Basic Function >
(1) Stacking : 500 sheet with 20lb sheet
(2) Stapling : 50 sheet stapling with 20lb sheet
: 5,000 staples per a stapler cartridge
(3) Offset at Non Staple job : Available
(4) Offset at Stapled job : Available (Gradco cannot avoid infringing the Canon’s Patent “JP 2531751” for this
stapling with Offset stacking mode)
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA