Samsung SCX-6555N - Specification

Finisher
Service Manual
2-55
Samsung Electronics
2.4.2 Specication
1) Type of Unit : Pedestal style
2) Paper capacity : 2,000sheet (A4 80g/
㎡
)
3) Paper Loading : Front Loading
4) Paper Size : A4 SEF, LETTER SEF, FOLIO SEF, LEGAL SEF (Short Edge Feeding)
5) Paper Speed : 48ppm(A4), 50ppm(LETTER)
6) Dimension : 415×540×468.5mm (W × D × H mm)
7) Weght : 25 Kg (Net, empty paper)
8) Environment:
- Operating Temperature: 10
℃
~ 32
℃
- Operating Humidity: 20 ~ 80% RH
- Storage Temperature: -20
℃
~ 50
℃
- Storage Humidity: 10 ~ 95 % RH
- Install Temp/Humidity(Std.): 15~ 25
℃
, 30 ~ 70% RH
9) Power : 24V/5V used (from Engine)
- input power : 24V ± 10%, 3.3V ± 5%
- Power Consumption
1) Avrage : Max.1.5A/24V(target), Max.0.5A/5V
2) Max. : Max. 3A
10) Acoustic Noise
- HCF Printing : Ave. 55dB ↓
11) Connection type : Drawer Connector
- controll spec : Sasung I/F Specication
- control signal
No Item I/O QT’y used
1 BLDC Motor Output 1Ea *Driver circuit
2 DC Geared Motor Output 1Ea *Bottom Knock up Plate Lift
3 Magnetic Clutch Output 1Ea *On/Off clutch (Paper Feed)
4 Micro Switch Input 1Ea *Knock up Plate Limit
5 Photo Interrupt Input 8Ea * P_Empty, Paper level, Feed, P_Limit Paper
size detect
12) Motor Drive
- Paper feeding : BLDC Motor
- Bottom knock up plate lifting : DC geared motor
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA