■ Status LED
The Status LED on the control panel shows the status of your machine.
See the able below to know your machine’s status.
Then machine is in interrupt printing modeBlue On
The machine is not in interrupt printing modeBlue OffInterrupt (LED button)
The machine is in power saver modeBlue On
The machine is not in power saver modeBlue OffPower Saver (LED
button)
Recoverable errors that user’s intervention is
not needed to recover happens such as paper
mismatching.
The machine is in the warning status such as
end of consumables.
Red Blink
Errors that need user’s intervention such as
paper jam, toner empty, tray empty, cover
open
Red On
. Copy Mode : Copy job is in progress
. Fax Mode : Fax job (RX, TX) is in progress
. Scan / Email : Scan or Email job is in
progress
. Printing:
-Slow Blinking : Data processing
- Fast Blinking : Engine is printing
Green Blink
ReadyGreen On
Power OffOffStatus (LED)
DescriptionLED statusED or LED button