Continued
3. Disassembly and Reassembly
3.1 Disassembly and Reassemblyons on Disassembly3-1
3.1.1 Screws used in the printer3-2
3.2 Customer Replaceable Units3-5
3.2.1 Toner Cartridge3-5
3.2.2 Replacing the Drum Cartridge3-7
3.2.3 Replacing The Stapler3-9
3.3 General Disassembly 3-10
3.3.1 Cover 3-10
3.3.2 DADF 3-11
3.3.3 OPE 3-14
3.3.4 Scan Assy 3-15
3.3.5 Main board 3-16
3.3.6 SMPS board 3-17
3.3.7 FDB (Fuser Drive board) 3-17
3.3.8 Transfer Roller 3-18
3.3.9 ELA HOU-ID SENSOR 3-18
3.3.10 Fuser 3-20
3.3.11 Exit Assy 3-21
3.3.12 Pick up roller 3-21
3.3.13 LSU 3-22
3.3.14 Drive Exit Assy 3-22
3.3.15 Main Drive Assy 3-23
3.3.16 MP Assy 3-24
4. Alignment & Troubleshooting
4.1 Alignment and Adjustments4-1
4.1.1 Paper path4-1
4.1.2 Clearing Paper Jams4-3
4.1.3 Abnormal Image Printing and Defective Roller 4-14