In the duplex unit area
If the duplex unit is not inserted correctly, paper
jam may occur. Make sure that the duplex unit is
inserted correctly.
1. Open the side cover.
2. Release the guide to pull the jammed paper
easily.
3. Remove the jammed paper.
4. Close the side cover.
In the stacker (nisher)
Finisher Jam 0
1. Open the stacker front cover.
2. Pull out the stacker lifting the stacker lever 1c
up.
3. Remove the jammed paper.
4. Slide in the stacker until you hear the sound
‘click’.
5. Close the stacker front cover.
To Next Page
Loading...
