4.1.5.4 Understanding the SCAN Screen
To use the scanning feature, press Scan on the Main screen. If the screen displays an other menu, press
home button to go to the Main screen.
If the message asking Auth. ID and Password, it means the network administrator has set the authentication
in SyncThru Web Service.
- Scan to Email: Scans and sends the scanned output to the destination by email.
- NetScan: Scans and sends the scanned output to the destination with the Network Scan program.
- Scan to Server: Scans and sends the scanned output to the destination with SMB and FTP.
To Next Page
Loading...
