English _15
CONNECTING WITH OTHER DEVICE
CONNECTING THE VIDEO, AUDIO, AND MONITOR
CONNECTING THE USB
1. By factory default, a USB port is provided for external connection.
2. You can connect a USB HD
D, USB memory or mouse to the USB port.
3.
If a USB HDD is connected to the system, recognition and settings are available in “Menu > Setting the Device >
Storage Device”. (Page 43)
4. This product supports hot-plugging, which connects/removes the USB device during the system operation.
J
If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the DVR.
CONNECTING POS DEVICE
1. You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with
a RS-232C cable.
2. Connection setup for the RS-232C port is available in “Menu > Device > POS Devices”, press the
<POS Device Setup> button and set <Baudrate, Parity, Data, Stop bit and Transfer Type>. (Page 46)
connecting with other device
To Next Page
Loading...
