English _63
USING THE DVR
DDNS
You can set the DDNS site for a remote user’s network connection.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Network> window to
move to <DDNS>, and press [ENTER] button.
2. Use virtual keyboard to enter user inputs.
Refer to “Using Virtual Keyboard”. (Page 32)
If you select <OFF>, the input box will be inactive.
If you select <iPOLiS>, the “DDNS host address” item will be
displayed.
iPOLiS users should register the device with the website
(Korea: http://www.samsungipolis.co.kr,
Overseas: http://www.samsungipolis.com) and provide the user name. (ex: Registered as SRD-442_HOME)
3. When the DDNS setup is done, press <OK>.
DDNS Setting
DDNS is a short form of Dynamic Domain Naming System.
DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters
(ex : www.google.com) to an IP address consisting of numbers (64.233.189.104).
DDNS (Dynamic DNS) is a service that registers a domain name and the floating IP address with the DDNS
server so that the domain name can be routed to the IP address even if the IP is changed in a dynamic IP
system.
Live Transfer
Sets the quality of the image that is transferred from the DVR to the network.
Using the mouse may help make setup easier.
1. In the <Network> setting window, press the up/down
(
) button to move to <Live Transfer> and press the
[ENTER] button.
The Live Transfer window appears.
2. Use the direction buttons (
◄ ►
) to move to a desired
item and set the value.
3. When the live transfer is done, press <OK>.
The resolution is fixed to CIF(S), and you can specify the transfer
quality only.
Live Transfer
Resolution
CIF(S)
Quality Low
OK Cancel
OK Cancel
DDNS
DDNS Site OFF
Host Name
User Name
User Password
To Next Page
Loading...
