52
4.6.5. HDD Setup
From this page, you can configure the storage devices connected to the system.
HDD
On top of the screen the types and statuses of internal HDDs, external HDDs, and/or NAS
devices currently connected to the system are listed. Internal and external HDDs give their
model, record times, "total size" (total capacity) and "free size" (remaining capacity); NAS
devices give their user-assigned names and current connection statuses. RAID-configured
internal HDDs are displayed as "RAID" instead of "Internal" and their model names are
replaced by the raid mode: "RAID1 MODE" or "RAID5 MODE." While an HDD is being
formatted, an HDD is in the disk checking process, and a new RAID mode is being
configured; "Formatting," "Testing," and "Building" are displayed instead of the device
model names.
To Next Page
Loading...
