User Manual
26
1. User sequence can define up to 16 channels.
2. The example shown above has defined 6 sequences in the following order:
Single (1) Æ Full (16DIV) Æ 4 Partition (4A) Æ Single (5) Æ
Single (6) Æ 9 Partition (9A). SVR-960/945 support only up to 9 partition.
4.5 Event Screen
- A screen may be set to pop up automatically in case of an event trigger.
- The pop-up screen's frequency setting may be set in "Switch to Event Screen" under
"Monitor".
- In cases of multiple event triggers in multiple channels, the partition mode determined by
the number of such channels will be used to display them. For example, if events were
triggered in three separate channels, they will be displayed in the 4 partition mode. To
return to original partition mode, click one of the event screens.
To Next Page
Loading...
