Samsung SVR-1680 - Chapter 5. Playback; Playback; Playback with Main Screen (16;9 Division Screen); Playback Functions

User Manual
30
saying "Screen Locked" will appear and lock the screen. If the user password is set to "Off",
then a message saying "Enable user passwords first" will appear instead.
Screen Lock will block all button inputs; it must be disabled first to activate other functions.
Pressing any button in Screen Lock mode will prompt a user password screen. The
corresponding passwords will deactivate Screen Lock.
Chapter 5. Playback
5.1 Playback
5.1.1 Playback with Main Screen (16/9 division screen)
- Press [PLAY] button or click in the function menu with the mouse from the monitoring
mode.
- Pressing [PLAY] or [FWD] will play the recorded data at 1x speed (default value).
- Pressing [REW] will play the recorded data in the reverse direction at 1x speed (default
value).
Playing visual data in nine channels will limit the frame rate to 2 fps. Therefore,
the total frame rate of the nine channels will add up to 18 fps. With a single
channel, the frame rate will be limited to 30 fps.
Pressing [PLAY] from a monitor partition mode will play the data from 16 or 9
channels.
5.1.2 Playback Functions
PLAY
: Plays the data at 1x speed. Press [PLAY] or click
in the function
menu.
Pressing [PLAY] from the monitoring mode will always prompt multi
playback mode. Also, pressing [PLAY] to play the recording from the
last time a playback has been viewed.
PAUSE
: Pauses the playback. Press [PAUSE] or click
in the function
menu.
STOP
: Stops the playback. Press [STOP] or click
in the function menu.
FWD
: Press [FWD] to modify playback speed (x2, x4, x8, x16, x32, x64,
x1/2, x1, x2, x4, …). Pressing [FWD] during a live visual feed will
play the recording from 1 minute ago. Clicking
in the function