User Manual
47
6.6.1.2 Motion Detection Setup
This menu is used to configure motion detection for the purpose of event recording for each
channel.
Motion Detection
There are 12 levels of motion detection sensitivity: Min., 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, Max.
6.6.1.3 Text Setup
This menu is used to configure text events for the purpose of event recording and the text must
set up in "Event Setup" under the OSD menu.
Recording
Text event recording events may be set to "On" or "Off".
6.6.2 Configuring Event Recording for All Channels
It is possible to apply the same settings for all analog channels throughout.
To Next Page
Loading...
