User Manual
43
6.3.1.5 Brightness / Contrast
It can control Brightness & Contrast of image.
After pressing [ENTER], press the left/right buttons or the mouse wheel to choose between "On"
and "Off".
6.3.1.6 PTZ
This option configures settings regarding the PTZ device, including PTZ Home, Idle Time, Port
and Address.
6.3.1.6.1 PTZ Home / PTZ Idle Time
This menu is only relevant for cameras supporting the PTZ (Pan/Tilt/Zoom) feature. When
enabled, the camera will return to its preset home position after a period of PTZ idle time.
After pressing [ENTER], use the left/right buttons or the mouse wheel to select the home preset
position and idle time duration.
6.3.1.6.2 PTZ Port
This menu is only relevant for cameras supporting the PTZ (Pan/Tilt/Zoom) feature.
After pressing [ENTER], use the left/right buttons or the mouse wheel to select the PTZ port of
the channel.
6.3.1.6.3 Address
This menu is only relevant for cameras supporting the PTZ (Pan/Tilt/Zoom) feature. After
pressing [ENTER], use the up/down buttons or the mouse wheel to configure the base address
of the PTZ device.
For detailed information on PTZ cameras supported by the product and their
advanced configuration settings, please refer to the relevant list under "7.4.9 PTZ
Usage".
6.4 Quick Recording Setup (Quick Setup)
The Quick Setup menu configures all analog channels with equal settings, abbreviating the
setup process.
To Next Page
Loading...
