Samsung SVR-1680 - Load Preset; Save Preset; Auxiliary on; Auxiliary off

User Manual
29
- Select Zoom/Focus from PTZ mode.
- Use the direction buttons on the front side of the console or the mouse wheel to zoom and
focus.
4.8.3 Load Preset
Used to switch to a preset position from real-time monitoring mode.
- Select the desired Preset setting using the up/down buttons or the mouse wheel.
- Once a preset mode has been selected, select Load and press [ENTER] or left-click to
load.
-
4.8.4 Save Preset
Used to set a new preset position from real-time monitoring mode.
- Move the camera to the desired position using the ‘Pan/Tilt’ and ‘Zoom/Focus’ menu.
- Select the desired Preset setting slot using the up/down buttons or the mouse wheel.
- Once selected, select Save and press [ENTER] or left-click to save.
4.8.5 Auxiliary On
Used to activate special PTZ device functions from real-time monitoring mode
- Select the desired Aux option using the up/down direction buttons or the mouse wheel.
- Select On and press [ENTER] or left-click to activate.
- (Total 16 Aux functions are available.)
4.8.6 Auxiliary Off
Used to deactivate special PTZ device functions from real-time monitoring mode.
- Select the desired Aux option using the up/down direction buttons or the mouse wheel.
- Select Off and press [ENTER] or left-click to deactivate.
4.8.7 Menu
Use when entering console menu of connected PTZ device., With front direction
button(UP/Down/Left/Right) and Enter button , user can configure and after the configuration,
push ESC button or “PTZ” button of the front to be out of menu(But, it can be available only with
Samsung SPD protocol)
4.9 Screen Lock
This function is implemented to prevent unauthorized users from manipulating the settings.
To use this function, the user password must be set. (To create a user password, an
administrator password is required.) If the [ESC] button is held for three seconds, a message