User Manual
49
Pre-Event (sec)
Up to 5 seconds
Post-Event (sec)
Up to 60 seconds
6.6.3 Manual Recording Setup
This menu is used to configure recording sequences initiated by pressing [REC] on the front
side of the console. Starting a manual recording will ignore the regular settings and follow by
values set in "Manual" under Recording Setup. The recording duration will be defined by Pre-
Event and Post-Event under 'Manual'. Pre-Event determines how far back the recording will
begin at the moment of button input and Post-Event determines for how long the recording will
continue.
Recording Camera Num
It can select recording channels with relevant setup, and all & each channel selection are
possible.
Macro
There are 5 options total: (No Rec/Low/Standard/High/Custom). All options aside “Custom”
have preset “Speed” and “Quality” assigned to them.
Pre-Event (sec)
Determines the length of time the recording begins from prior to the user actually pressing
[REC]. Up to 5 seconds.
메모 [kdh2]: 국문 source에
없는 내용으로 무슨 의미
인지 파악 안 됨
To Next Page
Loading...
