User Manual
44
6.4.1 Configuring Quick Recording Setup
- Select ‘Quick Setup’.
Recording Schedule
There are five options for this entry. The default value is "No Rec." and therefore will not record
on schedule without configuration.
No Rec. / Low / Standard / High / Custom
Except for "Custom", all options have preset fps, screen quality and resolution associated with
them.
Resolution
There are 3 options total. (CIF/ HALF/ D1)
This option can only be configured if Recording Schedule is set to Custom.
How to Check for Recording Operation
Once the schedule event has been successfully configured, the REC LED on the
front side of the console will light up. Also, the save status will be tagged with
[S], displaying that all channels are being recorded normally.
6.5 Recording Schedule Setup
This menu is used to configure recording operations per channel or for all channels. Also, it is
also used to configure recording schedules as well. After the user has configured Quick Setup,
modifying parameters in this menu will cause the values set in Quick Setup to be overwritten.
To Next Page
Loading...
