User Manual
71
On the contrary, the user can use limited functions when the confirmations at authority are “O”.
If the user1 configure the unit as above, the user1 can use upto relay Off, power On, N/mic
function while the user2 can use the mic function only. Same method is applied upto user10.
Admin Password
Default administrator password is “11111111” and it is changeable. 8digits are required.
User Password
Default password for user1 is “11111111” and “22222222” for user2. Default password for the
user10 is “00000000”. In case of 16channel DVR, button10 is used as there is no relevant
number button for 0.
Changing password
When the user wants to change the password, click the password changing button as below
To Next Page
Loading...
