Please connect an RCA audio cable to the AUDIO OUTPUT connector (such as monitor with built-in speak-
ers).
3.2.3 Monitor
SVR-940
Connect the VIDEO OUT terminal of the system and the BNC terminal of the monitor, using the BNC
cable, in order to display video data to the main monitor. There is also a VGA video output for the PC
monitor.
SVR-450
Audio input
Please connect an RCA audio cable to the AUDIO IN connector (such as camera with built-in microphone
and others). (All types of microphone and speaker are compatible with the system.)
Chapter 3. Installation Chapter 3. Installation
• For Audio input setting, set [Audio] to [ON] in the Recording setting menu
Notes
• When playback with audio in split display mode is not working properly, turn the
display mode to Full screen to avoid an audio playback problem.
Notes
To Next Page
Loading...
