4.4.1 Normal recording
4.4.2 Scheduled recording
4.4 Recording
When the REC button is pressed, manual recording is started and the "R" icon (Manual Recording) is
displayed on the upper right corner of the monitor screen.
When the REC button is pressed again, the manual recording is stopped and the pre-recording setting
is activated. While recording with the pre-recording setting, the icons below indicate the trigger for
recording.
· C : CONTINUOUS RECORDING
· S : SENSOR RECORDING
· M : MOTION DETECTION RECORDING
· T : TEXT RECORDING (POS TEXT RECORDING)
· - : NO VIDEO INPUT
· 0 : NO RECORDING
· S : SENSOR RECORDING
· - : NO RECORDING
· C : CONTINUOUS RECORDING
· M : MOTION DETECTION RECORDING
· T : TEXT RECORDING
Chapter 4. Operating
Chapter 4. Operating
• The recording status icons are changed according to the type of recording. When the
corresponding channel is not being recorded, no recording status icon is displayed.
Notes
To Next Page
Loading...
