Samsung SVR-940 - Rs-232; Rs-422;485; E-Mail

Digital Video Recorder User’s Manual
54
This menu is for setting a connection with a POS device.
This menu is for setting a connection with Cameras and CCTV devices.
· SYSTEM ID : Set the system ID.
· BAUD RATE : Set the data transfer speed per second.
· DATA BIT : Set the data transfer bit-rate.
· PARITY BIT : Set the type of error checking for data transfer.
· STOP BIT : Set the insert bit after data transfer.
In case of still image capturing at an event, input the IP address to send this captured image to.
The conditions of sending e-mail
· If the setting value is 'Motion', 'ON', 'ON', the DVR will send e-mail with JPEG file when event occurs.
· When setting value is 'ON', if the system IP is changed by using dynamic IP, the DVR will send e-mail
include changed IP information.
· SYSTEM ID : Set the system ID.
· BAUD RATE : Set the data transfer speed per second.
· DATA BIT : Set the data transfer bit-rate.
· PARITY BIT : Set the type of error checking for data transfer.
· STOP BIT : Set the insert bit after data transfer.
5.7.4 RS-232
5.7.5 RS-422/485
5.7.6 E-MAIL
Chapter 5. Conguration
Chapter 5. Conguration