When Channel number buttons 1 ~ 4 (SVR-450) / 1 ~ 9 (SVR-940) are pressed, each channel is dis-
played in full screen.
When the AUTO button is pressed in each full screen mode, each channel is rotated automatically
following the setting in [SCREEN SETUP] > [Auto Sequence]. (SEQUENCE must be set to [YES].)
When AUTO is pressed again, the Auto sequence operation will be canceled.
Press the ENTER button, and the four connected channels are displayed in quad split screen
4.3.1 Function of screen display
4.3.2 Automatic channel rotation
Chapter 4. Operating
Chapter 4. Operating
To Next Page
Loading...
