Samsung SVR-940 - Motion Detection; Text

Digital Video Recorder User’s Manual
49
SENSOR : Select the channel for sensor setup.
- SENSOR TYPE : Select the sensor type. (N/O, N/C)
- N/O : NORMAL OPEN type sensor
- N/C : NORMAL CLOSE type sensor
- OFF : Set the sensor OFF
After setting RECORD MODE/MOTION, set the motion detection for every
CHANNEL : Select the channel for motion detection setup.
MOTION ZONE : Select the area for motion detection to Full or Partial zone.
- FULL ZONE : Detects motion by analyzing the changes in Full images from cameras.
- PARTIAL ZONE : Users can select the desired zone for motion detection.
MOTION SENSITIVITY : You can set the sensitivity to changes on a screen from 1 to 9. Higher values mean
more precise motion detection.
5.6.2 MOTION DETECTION
This menu is to setup recording of POS data over video. In order to match it with an input device and
its protocol, assign a HEADER1/2 and DELIMITER and set the line to display the data.
5.6.3 TEXT
Chapter 5. Conguration
Chapter 5. Conguration