EVENT BEEP : Select whether to turn the buzzer ON or OFF.
EVENT AUTO SEQ : Set to display in full screen the channel that the event activated.
EVENT TIME : Set the full screen display time when the event was activated. (3 to 5 seconds)
During this EVENT TIME, other event-activated channels record but do not display in full
screen. Only after this EVENT TIME ends, can other event-activated channels be displayed
in full screen.
TEXT MONITORING : Set whether to display POS information such as product name, price, quantity, etc.
A Schedule can be set 24 hours a day.
· S : Sensor record
· - : No record
· C : Normal record
· M : Motion detection record
· T : Text record
IMAGE QUALITY [High/Mid/Low] : Set the compression level for images to be stored. At a resolution of
720X480, the system records at max. 30fps. At a resolution of 360X240, the system records at max. 12fps.
PRE EVENT DURATION : This is the pre-event recording setup. It automatically records 5 seconds of
pre-event data if you set it to 5 secs. Pre-event recording is not activated if you
set it to OFF.
POST EVENT DURATION : Recording continues for the predefined time following the occurrence of an
event. The available setting values are from 1 to 20 seconds.
AUDIO : Select whether to save audio data along with video.
SENSOR SELECT: Set it to ON to activate the sensor.
5.6.1 EVENT
5.6 EVENT SETUP
This is a set up menu related to the DVR system. Press the MENU button and select the Tab using
the Left/Right button. The submenu related to the system then appears as illustrated below. Press the
ENTER button and select the submenu using the Left/Right button. Then press the ENTER button again
and you can select setup items using the Left/Right button.
Chapter 5. Conguration
Chapter 5. Conguration
To Next Page
Loading...
