Samsung WB200F - Page 27

Disassembly and reassembly
3-14 Copyright© 1995-2012 SAMSUNG. All rights reserved.
Fig. 3-26
Fig. 3-27
4. Remove the following parts in the order indicated below.
① BASE LENS
② GEAR IDLE
① BASE LENS
② GEAR IDLE
5. Remove the FPCB HOLDER.
6. Remove the FPCB from the loop part of FPCB HOLDER as indicated.
1. Remove the FPCB by pull out in
direction of the arrow.
2. Remove the FPCB.
Front
Back
Fig. C