Samsung WB200F - Barrel Disassembly

To Next Page

To Previous Page

Disassembly and reassembly

SCREW

Fig. 3-24

Fig. 3-25

1. Remove the six SCREWS.

2. Remove the FPCB from the connector as illustrated in "Fig. A".

3. Remove the loop part by slightly move the FPCB as shown in the "Fig.B".

1. Open.

1. Remove the FPCB from the

loop part.

2.Remove the FPCB from the

loop part.

2. Remove.

Remove the FPCB from the connector.

Fig. AFig. B

FPCB

3-2 Barrel Disassembly

Other manuals for Samsung WB200F