Samsung WB200F - Lens Shading Adj

Adjustment
8-6 Copyright© 1995-2012 SAMSUNG. All rights reserved.
<Adjustment method>
1. Prepare the Light source box.
* Luminance specication of the Light box is LV 12.
* The Light box is located at 10mm ± 1mm with the body tube open.
* The colour temperature specication of the Light box is 3300K.
2. Insert the memory card containing the adjustment le into the camera and then install the camera to the
Light source box.
4. Select the Lens Shading of adjustment menu.
5. The adjustment process will automatically start.
 Adjust the Lens Shading with large lense, Zoom 0 condition.
 Refer to the EEPROM WRITE information and write the adjustment result to EEPROM.
 Write the result of the adjustment value in the data le by referring to the CARD WRITE data.
r Set the lower and upper specication.
6. When the adjustment is completed, the camera will automatically be turned off.
8-5 LENS SHADING ADJ
■ Adjust the lens shading for the brightness of the periphery of the lens for each camera.
■ Because the surrounding brightness is lower compared to the centre for each set, separately adjust each set
so that the surrounding brightness is higher.
Light source box
Tripod
Camera
Light source box
Fig. 8-8