Copyright© 1995-2012 SAMSUNG. All rights reserved.
8-7
Adjustment
<Adjustment method>
1. Attach an 18% reective paper in the dark room where the light is blocked.
2. Set up the camera in the dark room.
3. Set the distance between the reective paper and camera to 50cm.
4. Insert the memory card containing the adjustment le into the camera and then
entering the adjustment mode.
5. Select the Flash & AWB of adjustment menu.
6. The adjustment will automatically start.
Compare the reference illumination for 2 illuminations using the ash algorithm, and make a judgment.
By using the average value of the illuminance of 2 times, check the R and B gain to make Pass/No
Pass judgment.
Record the R and B gain to EEPROM during ash process and R, B gain success.
7. When the adjustment is completed, the camera will automatically be turned off.
Fig. 8-9
Camera
50cm
Reective paper
Tripod
8-6 FLASH & AWB ADJ
■ Set a limit to the illuminance by the Strobo light to classify the hardware defect.
■ Classify the set that deviates from the specications by illuminating times and then calculate the ash R, B gain.
■ AWB HIGH item is adjusted simultaneously.
Light source box
Tripod
Camera
To Next Page
Loading...
