Samsung WB200F - Version Check

Copyright© 1995-2012 SAMSUNG. All rights reserved. 7-3
Firmware update
1. Use fully charged battery for power.
2. First turn off the power of the camera.
3.Press the (1) SHUTTER button + WIDE direction, and then turn the (2) POWER on.
4. Check the version of the rmware and then turn the power off.
Fig. 7-4
Fig. 7-5
 Power ON
SHUTTER
WIDE
 WIDE + SHUTTER button
7-2 Version check
This describes how to check the version of the current rmware of the camera.
F/W VERSION:
DSP VER: 1211261
OIS VER: 1211221
TSP VER: 0x13
S/N: A0013CBH700369C
BARREL S/N:
MAC ADDR: 00:00:00:00:00:00
DPC: OK
VGA(0) QVGA(18)
HD(10) STLO(106) STL1(348)
Press [power key] to shutdown