Disassembly and reassembly
3-24
Copyright© 1995-2012 SAMSUNG. All rights reserved.
Fig. 3-43
Fig. 3-44
8. Insert the FPCB into the groove of FPCB HOLDER as illustrated in "Fig. H".
9. Install the FPCB HOLDER.
2. Insert to turn the FPCB by direction
of the arrow.
.
1. Insert the FPCB by direction of the arrow.
Front
Back
Fig. H
BASE LENS
GEAR IDLE
10. Install the GEAR IDLE.
11. Align the corresponding position of ⓐ, ⓑ as illustrated in "Fig. I" then install the BASE LENS.
ⓐ
ⓑ
Align the corresponding position of ⓐ, ⓑ.
Fig. I
To Next Page
Loading...
