Copyright© 1995-2012 SAMSUNG. All rights reserved.
7-5
Firmware update
Shutter button
Fig. 7-8
Fig. 7-7
4. The version of the rmware to update will be displayed on the LCD screen. When you press the
SHUTTER button, the rmware update will start.
5. The progress of the rmware update will be displayed on the LCD and the update will proceed.
6. When the update is completed, the camera will automatically be turned off.
Copying codes...
The camera turns o automatically after the upgrade is
complete.
Do not power o during the process.
Formatting partitions...
The camera turns o automatically after the upgrade is
complete.
Do not power o during the process.
Saving backup datas...
The camera turns o automatically after the upgrade is
complete.
Do not power o during the process.
Copying... [5%]
The camera turns o automatically after the upgrade is
complete.
Do not power o during the process.
To Next Page
Loading...
