Samwon Tech SDR100E Series User Manual

18
2-4. Setting button operation
[Table 2-1]
Button type
Button operation
It is used for inputting the general numbers and name.
It is used for selection for one out of many types.
It is used for selection for one out of more than 2 parameter setting. (ON / OFF state)
It is used for selection of Y/N for the corresponding parameter. (ON / OFF state)
It is used for screen conversion of different function.
It is used for increasing or decreasing of the page within the screen of same function.

Samwon Tech SDR100E Series Specifications

General

Brand	Samwon Tech
Model	SDR100E Series
Category	Measuring Instruments
Language	English