Samwon Tech SDR100E Series User Manual

20
2-6. Parameter setting method
● When is selected in basic setting button in the above [Table 2-1],
the input key of the setting value is shown as followings and the data can be input.
● When the data out of the setting range is input, error message (“LIMIT ERROR”) is shown on the input data display window with the error sound (“Beep”)
▲ Input key for setting the password
▲ Input key for setting the experiment name and message
▲ Input key for setting the numerics
▲ Display out of the setting range

Samwon Tech SDR100E Series Specifications

General

Brand	Samwon Tech
Model	SDR100E Series
Category	Measuring Instruments
Language	English