94
16. DI function and operation
Parameter Initial value
BUZZER TIME
DI DETECTION TIME
DI1 OPERATION
DI1 RELAY
DI2 RELAY
00.00 ~ 99.59(MIN.SEC)
00.00 ~ 99.59(MIN.SEC)
ERROR, RECORD
0 ~ 12
0 ~ 12
Setting range Unit
ABS
ABS
ABS
ABS
ABS
00.01
00.01
ERROR
0
0
ERROR
RECORD
Instruction Description
The buzzer operating time is set in DI occurrence.
Set the DI detection delay time is set.
DI1 operation method is set.
Buzzer is ringing and recording into the error history
Use ON/OFF operation for graph saving
The relay output in DI1 creation is set.
The relay output in DI2 creation is set.
● When the “DI config and operation” is selected in the [Fig. 12-1 System parameter screen],
the parameters related in DI function and operation can be set.
● It can be set when the DI option is selected in product purchasing. ● Please refer to [2-3 Basic operation flow chart]
Holding time
DI detection
DI detection
delay time
BUZZER TIME
DI DETECTION TIME
DI 1 OPERATION
DI 1 RELAY
DI 2 RELAY
[Fig. 16-1] DI function and operation setting screen
DI function operation setting
To Next Page
Need help?
General