Sana SMART BREAD MAKER - PROGRAM No. 5 - JAM

PROGRAM No. 5 – JAM
(preparation of lard, scraps, etc. is also possible)
Jam
Program No. 5
PROGRAM - description
Setting
(0 = OFF)
Mixing
+ baking 1
Time setting
Temperature setting
Kneading speed:
P=0, P=1 (10%), P=2 (50%), P=3(100%)
0 – 2 hrs
50 – 230 °C
P=0, P=1, P=2, P=3
Mixing
+ baking 2
Time setting
Temperature setting
Kneading speed:
P=0, P=1 (10%), P=2 (50%), P=3(100%)
0 – 2 hrs
50 – 230 °C
P=0, P=1, P=2, P=3
Mixing
+ baking 3
Time setting
Temperature setting
Kneading speed:
P=0, P=1 (10%), P=2 (50%), P=3(100%)
0 – 2 hrs
50 – 230 °C
P=0, P=1, P=2, P=3
9 steps in total for setting one recipe – 3 steps for each function.
There have also been many more functions enabled in the program for making jams. It is no problem if
you need to mix and warm the mixture at a changeable temperature. You can select not only the
kneading speed from 0 to 100 % but also different times and even temperature distribution during
heating.
Now you can also prepare “juicy or crispy” scraps and lard – epicures' favourite recipes!
Sample simple setting for jam in program No. 5
Mixing
+ baking 1
15 minutes
190 °C
P=0
1. step - preheating time setting
2. step - preheating temperature
3. step - motor, and thus the kneaders are switched off
Mixing
+ baking 2
60 minutes
170 °C
P=1
4. step - heating time
5. step - heating temperature
6. step – motor power (speed) is 10%
Mixing
+ baking 3
30 minutes
50 °C
P= 0
7. step - cooling time
8. step - minimum temperature
9. step - kneaders are switched off
smartbreadmaker.com
- 13 -
SmartBreadMaker